Manual: Jog Mode
Jog mode is primarily used to position the table. Note: Jog mode preserves the position, so when entering Jog mode position will show the angle the table was last at.
Display shows current speed of table and current position in decimal degrees.
The bottom line shows the machine status.
,  Move the table CCW / CW by 0.01 degrees for each press.
,  Move the table by 0.1 degrees.
,  Move by 1.0 degree.
[<<][>>] Move by 10.0 degrees.
[G] To directly enter an angle to turn to.
[C] To return to the main menu.
 Query and reset indicated position to 0.00.
[Speed] Cycles through the five speed settings.
Note: Actual angle moved is to the nearest step. For example a 60:1 worm with a half step controller has a minimum step of 0.015 deg, so this would be the minimum each step could take with the best accuracy being half that value.